Fed. Spec. Jaw and Eye Swivel
Fed. Spec. Jaw and Eye Swivel
Grade: 316 Stainless Steel
Specifications: Fed. Spec. RR-C-271F, Type VII, Class 2 | MIL-DTL-32655
Retail and bulk packaging available
The Fed. Spec. Jaw and Eye Swivels are ideal for lifting or rigging applications where twists in chain, wire rope or cordage are unwanted. They are made from grade 316 stainless steel to offer maximum corrosion resistance and durability and are able to support loads up to 5,200 lbs. These swivel ranges in size from 3/16″ to 5/8″ and should be used where frequent attaching and detaching is required. This product is a positioning device and is not intended to swivel or rotate under load. It is manufactured in accordance with Federal Specification: RR-C-271F Type VII, Class 3 (except 316 stainless steel).
Specifications
ALL DIMENSIONS ARE NOMINAL (+/- 3%) AND ARE SUBJECT TO CHANGE WITHOUT NOTICE.
| ITEM | A (size) | B | C | D | E | F | G | H | X | Y | Z | WLL (lb) | WT (lb) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S0155-FS07 | 1/4″ | 0.75″ | 0.80″ | 0.50″ | 0.85″ | 0.31″ | 0.25″ | 2.58″ | 1.67″ | 3.32″ | 0.74″ | 900 | 0.22 |
| S0155-FS08 | 5/16″ | 1.25″ | 1.17″ | 0.56″ | 0.88″ | 0.38″ | 0.38″ | 3.31″ | 2.00″ | 4.27″ | 0.99″ | 1,600 | 0.53 |
| S0155-FS10 | 3/8″ | 1.25″ | 1.06″ | 0.63″ | 1.07″ | 0.50″ | 0.38″ | 3.63″ | 2.34″ | 4.70″ | 1.03″ | 3,400 | 0.76 |
| S0155-FS13 | 1/2″ | 1.50″ | 1.45″ | 0.75″ | 1.42″ | 0.63″ | 0.50″ | 4.59″ | 2.88″ | 5.97″ | 1.26″ | 4,400 | 1.42 |
| S0155-FS16 | 5/8″ | 1.75″ | 1.73″ | 1.00″ | 1.50″ | 0.75″ | 0.63″ | 5.35″ | 3.00″ | 7.09″ | 1.60″ | 6,000 | 2.48 |
