Jaw and Jaw Swivel

Jaw and Jaw Swivel

Grade: 316 Stainless Steel

Specification: MIL-DTL-32655

Retail and bulk packaging available

These Forged Jaw and Jaw Swivels are ideal for lifting or rigging applications where twists in chain, wire rope or cordage are unwanted. They are made from grade 316 stainless steel to offer maximum corrosion resistance and durability and are able to support loads up to 5,200 lbs. These swivel ranges in size from 3/16″ to 5/8″ and should be used where frequent attaching and detaching is required. This product is a positioning device and is not intended to swivel or rotate under load.

Drop Forged
Imported
Suncor Exclusive
Mil. Spec
Stainless Steel Forged Jaw & Jaw Swivel, S0156-FS05, S0156-FS07, S0156-FS08, S0156-FS10, S0156-FS13, S0156-FS16

Specifications

Stainless Steel Forged Jaw & Jaw Swivel, S0156-FS05, S0156-FS07, S0156-FS08, S0156-FS10, S0156-FS13, S0156-FS16, Line Drawing

ALL DIMENSIONS ARE NOMINAL (+/- 3%) AND ARE SUBJECT TO CHANGE WITHOUT NOTICE.

ITEMA
(size)
BCDEFGXYZWLL
(lb)
WT
(lb)
S0156-FS053/16″0.53″0.66″0.44″0.66″0.25″2.20″1.67″3.11″0.65″6000.23
S0156-FS071/4″0.60″0.85″0.50″0.85″0.31″2.69″1.85″3.68″0.75″1,0000.34
S0156-FS085/16″0.66″0.88″0.56″0.88″0.38″2.89″2.00″4.05″0.88″1,6000.52
S0156-FS103/8″0.85″1.07″0.63″1.07″0.50″3.64″2.57″5.04″1.05″3,0001.02
S0156-FS13*1/2″1.04″1.42″0.75″1.42″0.63″4.55″3.20″6.31″1.26″4,4001.89
S0156-FS165/8″1.23″1.50″1.00″1.50″0.75″5.11″3.66″7.34″1.63″6,0003.33
*Meets all the requirements of MIL-DTL-32655 (excluding S0156-FS13)